PPD stocks aftermarket and 4WD touring parts for the Holden Colorado RG (2012-2016), and we fit them in our Perth workshop on hoists with qualified fitters. This isn't a genuine-parts catalogue or a wrecker's listing. It's the upgrade gear that turns a stock RG into a load-carrying, touring or off-road build: suspension and leaf springs, bullbars, rock sliders, exhaust, ECU tuning and roof-top tent packages. With listings across Superior Engineering, PSR, Tough Dog, Rancho and Yakima, the job we help with most is matching the right part to your exact year and use case.
If you already know your series, jump to the suspension comparison below. If you're not sure whether your truck is an RG or RG2, read the series section first, because Colorado fitment changed at 2016.
Yes. Aftermarket and 4WD upgrade parts for the RG Colorado are readily available. Where supply gets tight is genuine Holden dealer spares and used wreckers' panels, since Holden has wound down. That's a different supply chain to what we run. PPD sells the aftermarket side: suspension, bar work, protection, exhaust, tuning and touring gear from brands that still actively manufacture for the platform. So if you want to lift it, protect it or set it up for touring, the parts are here.
The RG Colorado runs from 2012 to 2016. The facelift, commonly called the RG2, runs roughly 2016 to 2020. They look similar, but suspension geometry changed: front control arms and rear setup differ before and after 2016, so always confirm the year before ordering suspension. Bar work is even more variant-specific. A PSR Ambush bar moulded for the RG1 front end will not sit right on an RG2, and vice versa.
Because in-stock products span both series, don't assume cross-fit. Some touring gear (roof racks, tents, recovery mounts) carries across, but anything that bolts to the chassis, guards or front end needs year confirmation. Browse all RG Colorado (2012-2016) parts for the pre-facelift fitment, and confirm the right part with us if you're between series.
The main categories Colorado owners build out, in rough order of popularity:
If you're chasing power, tuning and exhaust do that work, not the suspension. Suspension is about ride, lift and carrying weight.
The RG runs coil front, leaf rear. The right setup depends on what you load and where you drive. Here's how the brands PPD stocks stack up for the Colorado:
| Brand | Stance | Best for |
|---|---|---|
| Superior Engineering | Heavy-duty, constant-load focus; struts, shocks and front coils | Owners running a canopy, drawers or constant tray weight who want the rear to sit level loaded |
| Tough Dog | Foam Cell and adjustable shocks; firmer, durable, good value | Touring and load builds that accept a firmer unloaded ride for better control with weight on |
| PSR | 4WD upgrade kits matched to bar/winch front loads | Builds adding a steel bar and winch up front that need front coils rated for the added nose weight |
| Rancho | Comfort-biased shock valving at a budget entry point | Daily-driven Colorados wanting a softer, more compliant ride without heavy load demands |
Use-case guidance, plain and simple:
Leaf springs are chosen by load rating, not just lift height. A constant-load pack (PSR) is built to sit level under permanent weight like a tray, tank or drawers, so it carries firmer when empty. A standard-duty pack rides softer empty but sags under heavy constant load. Rancho, by contrast, concentrates on comfort-biased shock valving, so it is better suited to a lightly loaded daily driver than a heavy constant-load build. Pick the pack rated to your typical loaded weight, not your empty weight. For any load and lift combination, confirm the exact pack with us, and refer GVM and towing sign-off to a qualified engineer.
Front protection on the Colorado is variant-specific. PSR's Ambush range covers both series, with Hoopless, single, low single, triple hoop and Sheet Metal Hoop options. Match the bar to your exact year, and confirm the right part with us before ordering. See all RG Colorado bullbars.
For underbody and recovery work, fit rock sliders and side steps to protect the sills off-road and give a step up. For trips away, our roof-top tent and tub rack packages, like the 2-person soft shell tent and tub rack package or the Canyon soft shell long-style tent, set the Colorado up for touring quickly.
Yes. Aftermarket and 4WD upgrade parts for the Holden Colorado RG (2012-2016) and RG2 (2016-2020) are readily available and made by active manufacturers like Superior Engineering, PSR, Tough Dog and Rancho. Genuine Holden dealer spares are a separate, tighter supply chain since Holden wound down, but the upgrade and touring side is well stocked.
The Holden Colorado RG runs from 2012 to 2016. The 2016 to 2020 facelift is commonly called the RG2. Suspension geometry and front-end fitment changed at 2016, so confirm your exact year before buying suspension or bar work.
Aftermarket parts are not hard to get. Suspension, bullbars, exhaust, sliders, tuning and touring gear are all actively manufactured. What can be harder is genuine Holden panels and dealer-only spares through used wreckers. For upgrades and 4WD builds, the parts are readily available.
Owners commonly report rear leaf sag once they add a canopy, drawers or a constant tray load, since the standard leaf pack isn't rated for permanent weight. Fitting a constant-load leaf pack (PSR) or a firmer Tough Dog setup, with front coils matched to any bar and winch, addresses it.
It depends on your load. For permanent weight like a tray, tank or drawers, PSR's constant-load packs keep the rear level. Rancho leans toward comfort-biased shocks, so it suits lighter daily use. Pick the pack rated to your typical loaded weight and confirm the exact part with us before ordering.