Intervolt In-Vehicle DC - DC Pro Battery Charger 25 Amp - DCC1225ACK-RP

In stock - ready for dispatch

The DCC Pro was developed for the purpose of charging and maintaining any auxiliary battery in an installation where the starting battery is used as the supply source. It has been designed for use in 4WDs, RVs, buses, coaches, caravans, campers or any vehicle with a 12VDC electrical system.

The DCC Pro performs as standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. As no modi cation to the vehicle's original wiring is required this ensures the manufacturer's electrical system is not compromised in any way.

The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!

Features

The best in-class performance for a charger of this size
The DCC Pro is a true 25 Amp charger, that is, 25 Amps at 50 deg C all day, every day. In addition the DCC Pro will continue charging at reduced output right up to 85 deg C!

Remote monitoring from the comfort of the driving seat
The DCC Pro is kitted with an interactive, in-cabin display for remote monitoring of the auxiliary charging status from both main and solar power charging sources.

Solar ready no need for a separate regulator or relay
The DCC Pro is a complete MPPT solar charge controller capable of handling 250 Watts of power with up to 30% greater efficiency than a standard PWM regulator.

Specifications

Input Voltage
-Main: 9 17 VDC,
-Solar Input: 27 VOC max. (open circuit no load)

Solar Power 250 Watts nominal (300 Watts peak)

Continuous Rating 25 Amps @ 50 deg C

Current Draw
-Charging Device: Including LED indicator 10mA
-Remote Display: With backlight off: 10mA max,
-With backlight on: 30mA max

Boost Voltage
-Standard Lead Acid: 14.4 VDC Nominal
-Absorbed Glass Mat: 14.6 VDC Nominal
-Gelified Electrolyte: 14.2 VDC Nominal
-Lead Calcium: 14.8 VDC Nominal

Float Voltage 13.2 VDC Nominal

Electrical Protection
-Thermal overload shutdown auto reset
-Electrical overload shutdown auto reset
-Under voltage disconnect auto re-connect
-Over voltage disconnect auto re-connect
-Reverse polarity protection of main terminals

Environmental Protection
-Charging Device: IP67 (internal components only)
-Remote Display: IP40 (not dust or water resistant)

Operating Temperature -20 deg C to +85 deg C

Operating Humidity Up to 98%

Charging Device Materials
-Heatsink: E-Coated ADC-3 die cast aluminium
-Blue Plastics: Temperature resistant PC/ABS alloy
-Black Plastics: 15% glass reinforced PBT
-Transparent Plastics: Temperature resistant PMMA

Remote Display Materials
-Dark Grey Plastics: Temperature resistant PC/ABS alloy
-Transparent Plastics: Temperature resistant PMMA

Terminal Material Tin plated brass

Terminal Fasteners 304 stainless steel

Conformity AS/NZS CISPR 11:2004 for EMC

Dimensions
-Charging Device: 112 x 112 x 75mm (including terminal cover)
-Remote Display: 60 x 36 x 59mm (including mounting bracket)

Weight
-Charging Device: 690 grams
-Remote Display: 55 grams