EGR Dust Defence Kit - Ford F150 2023-

• Market leader in Dust Defenders
• Black powdercoat steel side and floor bracing with rubber seals
• Combats any dust or water entering your tray
• Robust & hard-wearing

Product Info

The EGR Dust Defence Kit is the ultimate solution for keeping your Ford F150 2023-onwards tub clean, dry, and protected from dust, dirt, and water ingress. Designed specifically for the F150, this kit addresses the common issue of debris entering through the large gaps around the tailgate, ensuring your cargo area remains pristine in all driving conditions.

Manufactured from robust, high-quality materials, the Dust Defence Kit is engineered for long-lasting performance, even in harsh Australian environments. Its tough, hard-wearing construction provides superior protection against dust, mud, and water, making it ideal for work, off-road adventures, or daily use.

Installation is simple, with a custom design that integrates seamlessly with your F150’s tub and tailgate. The kit offers a secure, tight fit without compromising accessibility, allowing you to load and unload cargo effortlessly while maintaining full protection.

Suitable exclusively for 2023-onwards Ford F150 models, the EGR Dust Defence Kit delivers an unmatched level of tub protection. Travel with confidence knowing your vehicle’s cargo area is shielded from dust, dirt, and water, keeping your gear safe and your truck looking sharp.

NOTE: Suitable for 2023-Onward models only

Features

COMBAT DUST & WATER

ROBUST

SUPERIOR SEAL

Delivery & Fitment

FAQs

I am concerned that if I install an EGR Dust Defender that my fridge draw slide will no longer operate. Will this be an issue?

The EGR Dust Defender once installed is roughly 24.5mm high. This is normally lower than the ribs inside the tailgate which means the draw slide sits higher. If you are still concerned we recommend placing a thin rubber mat under your draw slider to raise the height by a few millimetres. This also gives an extra layer of protection for your vehicle's tub.

Since installing my EGR Dust Defender I have noticed my tailgate is harder to open and close. Is this normal?

Yes. In order to get the dust out the seal must have pressure up against the tailgate. This is to ensure the tightest seal is made to ensure minimal dust can get in.

I have a Tubliner, is the EGR Dust Defender compatible?

Yes, with conditions.

The EGR Dust Defender requires metal on metal contact in order for the seal to work. If you have a clip in a plastic Tub Liner it will require trimming (explains how with our fitting instructions). If you have a spray on Ute Liner you would need to remove the Tubliner in the areas required.

Will the EGR Dust Defender work if I do not modify the Tubliner?

The EGR Dust Defender is engineered to suit each vehicle tub based on no Tub Liner. If the Tubliner is not trimmed this can result in the parts not fitting correctly during installation. As the EGR Dust Defender also requires metal on metal contact to form the best seal it can. Tub Liners are a textured surface which has seam divots, meaning that seal will be less effective and this is not recommended.

Can I install a Dust Defender with existing draws or fridge?

If yoiu have existing draws, fridge or other accessory, this will need to be removed prior to fitting the Dust Defender. This is due to the angles being too tight to install. If you have questions about your particular tub setup, please let us know.

Leadtime

EGR Auto For Australian Conditions - Proudly distributed by PPD Performance Please note, these are made to order - generally 3-4 weeks lead time