EGR Dust Defence Kit - Ford RA Ranger 2022-

• Market leader in Dust Defenders
• Black powdercoat steel side and floor bracing with rubber seals
• Combats any dust or water entering your tray
• Robust & hard-wearing

Product Info

Keep your Ford Ranger RA 2022 onwards free from dust and debris with the EGR Dust Defence Kit, the ultimate solution for protecting your ute’s tub. Designed specifically for Ranger RA MY22 to MY24.25 (note: not compatible with MY24.5 models), this kit blocks dust and water from entering through the gaps around the tailgate, keeping your cargo clean and dry even in Australia’s harshest conditions.

Manufactured from durable, hard-wearing materials, the EGR Dust Defence Kit is engineered for a precise, custom fit. Installation requires a metal-to-metal application, with trimming of your tub liner for optimal performance. For easier fitment, it is recommended to temporarily remove accessories such as canopies, hard lids, or RollTrac covers during installation. The kit is compatible with a variety of tub covers, including canopies, hard lids, soft tonneaus, and EGR RollTrac systems, providing versatile protection for your ute setup.

Robust, practical, and designed to withstand long-term use, the EGR Dust Defence Kit ensures your Ranger stays cleaner and your cargo protected on every trip. Backed by EGR’s trusted Australian engineering, this kit is a must-have for off-road adventures, work sites, or daily driving in dusty environments.

Buy now at EGR Auto to safeguard your Ford Ranger RA 2022 and enjoy a cleaner, more protected tub every day.

- NOTE -
  -> Requires trimming of Tub Liner for fitment.
  ->  Fitment with 'spray on' liners will affect fitment of this product. 
This product requires a metal to metal application (the kit against your tub).  Liners need to be trimmed back to allow this contact - and spray liners may not be able to easily be trimmed.

  -> Removal of other items fitted to the top of your tub is also recommended when fitting this product (remove Canopy/Hard Lid/Rollcover - fit the dust kit, then re-fit the Canopy/Hard Lid/EGR RollTrac - as it's easier to trim your ute liner by removing it completely, then re-fitting it inside your Tub)

 

NOTE - Does not fit MY24.5 Models

 

Documents

Fitting Instruction - Suit RollTrac

Fitting Instruction - Suit Canopy/Hardlid/Soft Tonneau/Loadshield

Features

COMBAT DUST & WATER

ROBUST

SUPERIOR SEAL

Delivery & Fitment

Installation

Fitting Instructions Fitting Instructions - Suits RollTrac Only

FAQs

I am concerned that if I install an EGR Dust Defender that my fridge draw slide will no longer operate. Will this be an issue?

The EGR Dust Defender once installed is roughly 24.5mm high. This is normally lower than the ribs inside the tailgate which means the draw slide sits higher. If you are still concerned we recommend placing a thin rubber mat under your draw slider to raise the height by a few millimetres. This also gives an extra layer of protection for your vehicle's tub.

Since installing my EGR Dust Defender I have noticed my tailgate is harder to open and close. Is this normal?

Yes. In order to get the dust out the seal must have pressure up against the tailgate. This is to ensure the tightest seal is made to ensure minimal dust can get in.

I have a Tubliner, is the EGR Dust Defender compatible?

Yes, with conditions.

The EGR Dust Defender requires metal on metal contact in order for the seal to work. If you have a clip in a plastic Tub Liner it will require trimming (explains how with our fitting instructions). If you have a spray on Ute Liner you would need to remove the Tubliner in the areas required.

Will the EGR Dust Defender work if I do not modify the Tubliner?

The EGR Dust Defender is engineered to suit each vehicle tub based on no Tub Liner. If the Tubliner is not trimmed this can result in the parts not fitting correctly during installation. As the EGR Dust Defender also requires metal on metal contact to form the best seal it can. Tub Liners are a textured surface which has seam divots, meaning that seal will be less effective and this is not recommended.

Can I install a Dust Defender with existing draws or fridge?

If yoiu have existing draws, fridge or other accessory, this will need to be removed prior to fitting the Dust Defender. This is due to the angles being too tight to install. If you have questions about your particular tub setup, please let us know.

Leadtime

EGR Auto For Australian Conditions - Proudly distributed by PPD Performance Please note, these are made to order - generally 3-4 weeks lead time