Chevrolet Silverado (2019-2026) 1500 Lift Kit with FOX 2.5 Performance Shocks and Rear Lift Block Kit Front 3.5″ Lift Rear 1.5″

FOX 2.5 Performance Series HTO shock is a bolt-on shock loaded with position-sensitive technology, vehicle-specific valving, and larger pistons to improve on and off-road performance. A type II anodized aluminium body efficiently dissipates heat and prevents corrosion. The 2.5-inch shock body features an internal floating piston (IFP) to separate the shock oil from the high-pressure nitrogen, optimizing damping.
Hydraulic Top Out (HTO) technology offers usable position-sensitive rebound damping control on and off the pavement. HTO reduces harsh top-outs and increases comfort by forcing shock oil through a secondary shim stack to slow down shock shaft speed; HTO is particularly beneficial after installing heavier, aggressive tires and applications lifted higher than OEM specification.
Bolt-on 2.5 Performance Series HTO shocks to increase damping capacity and ride in comfort with position-sensitive rebound control.

Whiteline Fixed Offset Upper Control Arm Kit with Ball Joints is an all-in-one solution for vehicles with raised suspension.

After raising the vehicle ride height, not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. Installing an aftermarket fixed offset upper control arm helps to restore camber and castor to improve wheel alignment geometry and allows additional clearance to the suspension components.

Rear Lift Block Kit includes 2 leaf spring spacer blocks, extended u-bolts and required fitting components. Lift blocks are ideal to improve aesthetics however we dont recommend these as a substitute for heavy constant load carrying.

This complete suspension lift kit comprises of the following products:

1 Pair FOX 2.5 Performance Assembled Front Struts

1 Pair FOX 2.5 Performance Rear Shocks

1 Pair Rear Lift Block Kit

1 Pair Whiteline Front Upper Control Arms

Approximate Front Lift Height: 2.5-3.5″ Lift
Approximate Rear Lift Height: 1.5″ Lift

Fitment Notes:
Front Struts are supplied as a pair, pre-assembled with coil spring and top mount. Height Adjustment is achieved using the threaded body to alter the ride height as required.

Wheel Fitment – Aftermarket Upper Control Arm Clearance

Important Fitment Information

When installing the specified aftermarket upper control arms, the factory 20 x 9" wheels with +24 to +27 offset, fitted with 275/60R20 tyres, are not compatible due to clearance between the wheel/tyre assembly and the aftermarket upper control arm.

The factory wheel offset positions the wheel and tyre too far inboard, resulting in potential interference with the alignment correction upper control arm.

Recommended Wheel & Tyre Specification

For vehicles fitted with KTA316 aftermarket upper control arms, we recommend the following minimum wheel and tyre configuration:

• Wheel: 17 x 9", 18 x 9", 20 x 9"
• Wheel Offset: +12 to +1
• Maximum Recommend Tyre Width: 295