CROSS COUNTRY 4x4 Nissan Patrol GU TD42 EXTREME  Top-Mount Intercooler Kit

Cross Country 4x4 engineer and manufacture the BEST high-performance intercooler kits for the most popular models of 4x4.  

This is the LARGEST INTERCOOLER KIT available for the TD42 GU PATROL.  

Measuring an EXTREME 600x325x81mm this cooler is the ideal setup for those who are chasing power over 190rwkw and 30+ psi of boost.  

Core Size - 600mm x 325mm x 81mm PWR Race Series - NOTE DUE TO THE SIZE OF THIS CORE IT WILL ONLY WORK WITH LOW-MOUNT TURBO KITS. For high-mount kits, use the Ultimate kit instead.  

NOTE: Kit includes a replacement manifold required for the installation of the extreme intercooler kit. As such, the factory manifold must be sent back to CC4x4 after installation. A $350 core deposit is payable on this kit, which will be refunded on return of the factory manifold.  

The core is fabricated with a 3" outlet and 2.5" inlet with hand built aluminium end tanks.

Cross Country 4x4 use only the best intercooler cores on the market, manufactured by PWR!

Combined with  custom fabricated piping made in South Australia, these intercooler kits provide unrivaled quality and performance, ensuring your car is more reliable and more efficient than ever!

Reduce intake temperatures when towing or off-roading to help drop EGT's and improve fuel efficiency along with torque and power!  

Kits are manufactured to order, with typical build times of around 9  weeks.  

This kit is supported by a durable and high performance PWR  tube & fin intercooler core  with a  huge improvement in cooling surface area, and offering a dramatic reduction in power robbing core heat soak that you experience with the factory intercooler.

This Kit Includes:

• 1 x 2-2 ½ €� SILICONE REDUCER
• 1X 2 ½ €� 45 DEG SILICONE
• 1 X 2 ½ €� ALI JOINER 65MM
• 3 X 2 ¼ €� HOSE CLAMPS
• 1 X 2 €� HOSE CLAMP
• 2 X 3 €� 90 DEG SILICONE
• 2 X 3 €� ALI JOINER 70MM
• 1 X 3 €� SILICONE 90MM
• 6 X 3 €� HOSE CLAMPS
• 2 X WIRING LOOMS
• INSTRUCTIONS
• 4 X FOAM SQUARES
• 1 X STICKER
• 4 X M8 SAFETY NUTS
• 2 X M8 X 20 ALLEN HEAD BOLT
• 1M OF 4MM VAC HOSE
• 2M OF 60-055N OR 66-013 PINCHWELD
• POWER STEERING RELOCATION KIT
• LARGE BONNET SCOOP

 NOTE: Kit includes a replacement manifold required for the installation of the extreme intercooler kit. As such, the factory manifold must be sent back to CC4x4 after installation. A $350 core deposit is payable on this kit, which will be refunded on return of the factory manifold.