Toyota Prado (2003-2009) J120 Series VX & Grande WITHOUT SIDE AIRBAGS Black Duck® SeatCovers - PRA032SA PRA037 PRA038 PRA03SADR

WITHOUT SIDE AIRBAGS

Black Duck® SeatCovers, proudly sold by PPD Performance deliver peace of mind, protecting your seats from everything life and the great outdoors can throw at it. Whether it’s your messy kids, or the great outdoors, these fantastic seat covers deliver great fit, fantastic protection and a great look.

Generally these are made to order with a 3-4 week lead time currently.
If in stock they will dispatch immediately

Proudly Australian Made

Our heavy-duty canvas seat covers are made in Australia using Australian made materials developed specifically for the harsh Australian climate.

With manufacturing facilities in WA and over 1,900 resellers across Australia, your perfect seat cover is never far away!

Specifcations

These seat covers fit ONLY the following model, if you have a different model please see our other listings or contact us for support.

Shipping times & Stock Availability

Please Note: We keep many of these in stock, but are unable to keep all.

Generally these are made to order with a 3-4 week lead time currently.
If in stock they will dispatch immediately

CANVAS Care & Cleaning

PLEASE NOTE THESE ARE FOR CANVAS ONLY.
SCROLL DOWN FOR

• Vacuum to remove any dust or dirt
• Wipe with a cold, damp cloth
• If heavily soiled, remove covers from seats and use a low-pressure hose with cold water. Lie flat to dry
• Ensure the seat covers are fully dry before placing on vehicle seats

DO NOT machine wash

DO NOT dry clean

DO NOT tumble dry

DO NOT use detergent

DO NOT iron

4Elements Care & Cleaning

• Gentle, cold machine wash (<30C)
• Lay flat to dry
• Ensure the seat covers are fully dry before placing on vehicle seats

DO NOT tumble dry

DO NOT dry clean

DO NOT use detergent

DO NOT use bleach

DO NOT iron

Fitting Instructions

Our seat covers go through a rigorous design process to ensure they not only offer a tailored fit to your specific seat design, but they are also designed to be as simple as possible to fit.

To start

We recommend unpacking each seat separately to avoid mixing up the driver, passenger and rear seat parts. Remove the covers from the packaging and lay them out to check that you have all the correct parts.

You should have:

• Seat base
• Backrest (sometimes base and back are attached)
• Headrest
• Armrest (if applicable)
• Each piece is identified on the inside with a white label. On the Driver and Passenger seat label, there will be a ‘DR’ to indicate Driver and a ‘PA’ to indicate Passenger. If you have seat fitted air-bags, the teal AIRBAG label will go on the outside/window side of the seat
• Vacuum your original seats and remove anything from the seat pockets.

Fitting the seat base:

1. Slide the cover over the seat base, ensuring it is clear from any levers and buttons, line up the seams of the cover to the seams of the seat and massage into place
2. Once the cover is in line with the seams of the seat, push the centre flap through the seat base until you can see it pop out the back of your seat. (In some models you may need to detach the carpet on the back of your seat to allow access)
3. Pull the side flaps around and attach to the centre flap. Check to make sure none of the seat's levers and buttons is obstructed
4. If included in the seat cover design, pull straps under the seat, clearing all tracks and fittings. Pull tight and fasten to the opposite side – test movement of seat to ensure nothing is obstructed
5. Seat base fitting complete

Fitting the backrest:

1. Remove headrest (if applicable)
2. Slide cover over the top (like a jumper), make sure the back of the cover does not catch in the pocket on the back
3. Line up the seams of the cover to the seams of the seat and massage into place
4. Push the flap through the base of the seat, just like you did with the base
5. Pull through tight and attach to the back of the seat
6. Slide the headrest cover over the headrest with the label on the front and secure the flaps. This is designed to be a tight fit so make sure you have the seams lined up
7. Replace the headrest.
8. Backrest fitting complete

Repeat this process for the passenger seat and rear seats.

Once you have had your covers for a couple of weeks, we advise that you re-tension them as they will mould to the shape of your seat over time. This will leave you with the best fit possible.

**WARNING**

Only Black Duck SeatCovers that are labelled as being air-bag compatible are to be fitted to vehicles with seat fitted air-bags. Black Duck SeatCovers must not be fitted to seats containing side-impact airbag components unless they are the correct seat covers with the appropriate certification. Black Duck SeatCovers accepts no responsibility or liability if this warning is not adhered to.

Air-Bag Compatible

The Black Duck range of air-bag compatible seat covers is dynamically tested and certified to ensure Vehicle Standard Australian Design Rule 72/00 (Dynamic Side Impact Occupant Protection 2005) is not adversely affected.

We use advanced manufacturing techniques which allow the required air-bag release in the event of an accident, without compromising the safety of the occupants of the vehicle.

Returns & Exchanges

Please select your covers carefully, if you require any assistance please talk to our team prior to purchasing.

Please note any orders for non-standard colours (Anything other than Black or Grey) is part of the 'non-standard colour range'.
Please note that Black Duck® 'non-standard colour range' is non-returnable and non-exchangable except in the case of a manufacturing defect.